Configure The Océ Express Webtools Settings For A Mobile Connection - Oce PlotWave 750 Operation Manual

Configure the Océ Express WebTools settings for a mobile
connection
Introduction
If you want to give users easy access to Océ Mobile WebTools, the settings must first be
configured. With the information, you can develop a [Quick Response Card] to create easy access.
Before you begin
Make sure you configure your Wi-Fi network and connect the printer to the network.
NOTE
Log in as [Key operator] or [Power user] to be able to configure the mobile connection
information.
Illustration
Procedure
1.
Open Océ Express WebTools on your workstation.
2.
Go to the [Configuration] - [Connectivity] tab.
3.
Go down to the [Mobile] section.
4. Click [Edit] in the right-hand corner.
5. Enter the settings for the mobile connection. This information will also be printed on the [Quick
Response Card]:
NOTE
Enter information according to your IT policy. Contact your [System administrator] for more
information.
[Mobile] section in Océ Express WebTools
Setting
[Mobile printing password]
[Show mobile password on Quick
Response Card]
[Wifi name on connection sheet] (al-
so known as SSID)
[Wifi key on connection sheet] (also
known as security key)
6. Click [Ok] to confirm the determined settings.
Configure the Océ Express WebTools settings for a mobile connection
Action
Optional: Only define a key if you want users to enter a
password before connecting to the printer.
Use it when you need to control access to the printer.
Enter "Yes" if you want to display the password on the
[Quick Response Card].
Enter the name of your Wi-Fi network.
The name will be displayed on the [Quick Response
Card].
If required, enter the password for your Wi-Fi network.
The key will be displayed on the [Quick Response Card].
Chapter 4 - Use the Océ PlotWave 750 to print 167