Select The Input Mode - Oce TDS700 User Manual

Select the input mode

Select the input mode
Introduction
You can use the 'Input mode' setting to specify how a job will be sorted. The 'Single
sheet' option treats each sheet as a separate job. 'Multiple sheets' produces the
specified number of copies for each sheet in a job and then continues with the next
sheet. 'Multiple sheets' is illustrated below.
[111]
1 1 1
[111] Multipe sheets
'Set' produces one copy for each sheet in a set and then continues with the next copy
of the entire set, see the illustration below.
[112]
1 2 3
[112] Set copy
The active input mode can be closed by pressing the Stop key.
The currently selected input mode is marked with the bullet symbol.
Illustration
[113]
[113] Select the input mode
Select the input mode
Select the 'Feeding' card in the 'Original' section.
1.
Select the desired media with the 'Input mode' function key.
2.
Note: You can also select the input mode from the 'Custom' section (if this setting
has been defined for this).
184 Chapter 4 Use the Océ TDS700 productive scanner
2 2 2 3 3 3
1 2 3
1 2 3
4 4 4
1 2 3