Chapter 11. Command Troubleshooting; On Solaris 8 Operating Systems, Checkprereq Processes Do Not Complete; Situations Deleted From The Cli Are Still Listed On Tivoli Enterprise Portal Situation Editor; The Tacmd Addbundles Command Returns An Unexpected Kuicab010E Error Message - IBM E027SLL-H - Tivoli Monitoring - PC Troubleshooting Manual

Chapter 11. Command troubleshooting

This chapter describes problems you might experience with commands.
On Solaris 8 operating systems, checkprereq processes do not
complete
If a prerequisite check is executed for an agent on a UNIX or Linux endpoint,
either with the tacmd checkprereq command or the tacmd createnode command
with the -o EXECPREREQCHECK=Y command-line option, certain processes might
not complete. If you supply a Windows-syntax installation directory (for example,
C:\IBM\ITM) with either the -d | --directory flag or the group deployment
property (KDY.INSTALLDIR=C:\IBM\ITM), the execution of the prerequisite check
on the endpoint might hang some processes on UNIX or Linux operating systems.
However, if you observe this situation in your enviroment, you can end those
processes without causing additional problems. To avoid this issue, provide the
prerequisite check with the appropriate directory syntax for UNIX and Linux (for
example, /opt/IBM/ITM).
Situations deleted from the CLI are still listed on Tivoli Enterprise
Portal Situation editor
If you stop your hub Tivoli Enterprise Monitoring Server (TEMS) and then delete
situations using tacmd deletesit, the situations are deleted from the CLI, but are
still listed on the Tivoli Enterprise Portal (TEP) Situation editor. To avoid this issue,
delete situations from the CLI while the TEMS is running. As appropriate, the
situations do not display on the Situation editor.
The tacmd addBundles command returns an unexpected KUICAB010E
error message
Using the tacmd addBundles command results in an unexpected error message:
KUICAB010E: The addBundles command did not complete.
Refer to the following returned error: ERRORTEXT
The tacmd addBundles command is used to add one or more deployment bundles
to the local agent deployment depot. By default, this command also adds all
deployment bundles that are prerequisites of the deployment bundle being added,
if the prerequisite bundles do not already exist in the depot. The tacmd
addBundles command requires double the size of the bundle disk space free in the
depot (including the agent and all prerequisite bundles). The kdyjava.log file in the
system temp directory provides additional information about the problem.
tacmd removeBundles command returns unnexpected KUICRB010E
error message
Using the tacmd removeBundles command results in an unexpected error message:
KUICRB010E: The removeBundles command did not complete.
Refer to the following returned error: ERRORTEXT
© Copyright IBM Corp. 2005, 2012
201