Receive An Outofmemory Exception When Using The Import Or Export Commands; The Suggestbaseline Or Acceptbaseline Commands Fail; Problems With Take Action Commands And Curly Brackets; When Configuring The Monitoring Agent For Sybase And The Warehouse Proxy Agent, Receive Message To Use Candlemanage - IBM E027SLL-H - Tivoli Monitoring - PC Troubleshooting Manual

command or putfile command failures due to lack of space. As a result, any
temporary files should be deleted periodically.
Receive an OutOfMemory exception when using the import or export
commands
Edit the environment variable "TACMD_JVM_MAX_MEMORY" and override the
default maximum JVM memory value size of 256 MB. You can edit the value to be
between 256 and 2048, inclusive. Incorrect values or values out of range are
disregarded, with an error written to the kuiras1 trace log.

The suggestbaseline or acceptbaseline commands fail

You receive the following type of error: KUICAC014E The command failed because
the Tivoli Data Warehouse did not contain any historical data for the
managed system(s) for attribute "NT_Process_64.%_Processor_Time" for the
specified time period.
The warehouse did not contain any historical data from the managed system for
the specified situation attribute during the specified time period. The time period
is established by the start time and end time, and is further constrained by the
calendar entries you specified. In addition, historical data collection must be
configured and enabled for the attribute group, and the warehouse proxy agent
must be configured and running on the same host as the managed system.
Verify that historical data collection is enabled for the appropriate attribute group
and that the warehouse proxy agent is installed and running on the same host(s)
as the specified managed system or managed systems.

Problems with Take Action commands and curly brackets

Take Action commands that are created with curly brackets, {}, are not recorded
and cannot be selected from the Tivoli Enterprise Portal. This happens only for "}"
and not for "{", and only when the backward curly brace is embedded with single
quotes.
There has been a change in syntax where attributes that are enclosed in curly
brackets, {}, no longer are required to have quotes. See the following example:
&{grp1.atr1}.&{grp2.atr2}
When configuring the Monitoring Agent for Sybase and the Warehouse
Proxy Agent, receive message to use CandleManage
The CandleManage command has been deprecated. The message should reference
the ./itmcmd manage command.
listSit command with the type option fails with a KUIC02001E message
on Japanese Systems
Edit the kuilistsitVld.xml file to replace the following text:
<Type
with the following text:
206
IBM Tivoli Monitoring: Troubleshooting Guide
arg1="-t" arg2="--type"
Type ="String" ValidationRegExp="[-A-Za-z0-9 _/()\&%.]" Required="Y"/>