Tivoli Enterprise Monitoring Server Aborts Unexpectedly When Exiting The Telnet Session Used To Start It; Kciin0084E Timeout Appears While Waiting For Tivoli Enterprise Monitoring Server To Start On Aix; In A Hot Standby (Fto) Environment, Commands To A Mirror Hub Might Not Return Hub Records After Reconnection - IBM E027SLL-H - Tivoli Monitoring - PC Troubleshooting Manual

Tivoli Enterprise Monitoring Server aborts unexpectedly when
exiting the telnet session used to start it
About this task
A UNIX-based systems Tivoli Enterprise Monitoring Server aborts unexpectedly
when exiting the telnet session used to start it, either from the client or the
command line. If you start the Tivoli Enterprise Monitoring Server from a Bourne
shell, the Tivoli Enterprise Monitoring Server session terminates when you exit the
telnet session. Do the following so you can exit the telnet session without shutting
down the Tivoli Enterprise Monitoring Server.
1. Enter the Korn shell (ksh).
2. Start Tivoli Enterprise Monitoring Server.
KCIIN0084E Timeout appears while waiting for Tivoli
Enterprise Monitoring Server to start on AIX 5.3
After installation the Tivoli Enterprise Monitoring Server and Remote Tivoli
Enterprise Monitoring Server performance is very slow.
Confirm that the prerequisite software has been installed. The C libraries are
critical for the Tivoli Enterprise Monitoring Server performance at start and stop
times and are important for communication between Tivoli Enterprise Monitoring
Server and Tivoli Enterprise Portal Server.
The installation should check the prerequisites and show information in one of the
logs, such as the candle installation log or the Tivoli Enterprise Monitoring Server
log. If one of the prerequisites is missing the installation will not continue
automatically.
In a hot standby (FTO) environment, commands to a mirror
hub might not return hub records after reconnection
Redirect commands to the current hub Tivoli Enterprise Monitoring Server when
running the taccmd listappinstallrecs command in a hot standby environment
The tacmd listappinstallrecs command returns the application support
installation records and displays the current self-describing agent product
installation status for all Tivoli Enterprise Monitoring Servers in the environment.
This command connects to each online monitoring server one-by-one and retrieves
the installation records. The command cannot return data for offline monitoring
servers.
The mirror hub does not keep accurate node status of any endpoint, whether hub
or remote monitoring server. As the tacmd listappinstallrecs command presents
install records for any monitoring server, if you issue at a mirror, the acting hub
might or might not be omitted (as well as any remote monitoring servers in the
installation).
Best practice is to run the commands on the current hub.
Chapter 9. Monitoring server troubleshooting
165