Error Message 'Kdsma013 Open Vtam For; (Cansdsst Default) - IBM E027SLL-H - Tivoli Monitoring - PC Troubleshooting Manual

2. On the next panel, navigate to the F5=Advanced key.
3. Do the following on the Specify Advanced Configuration Values:
v Edit the Minimum extended storage field to 300000 K.
v Edit the Maximum storage request size fields to 16 (Primary) and 23
(Extended).
4. On the Configure the Tivoli Enterprise Monitoring Server main menu, select the
Create runtime members option to generate the DS#3xxxx Create runtime
members job. Submit the job and verify good condition codes.
5. Recycle the Tivoli Enterprise Monitoring Server.
Error message 'KDSMA013 OPEN VTAM for VDM1APPL failed
with status 8' occurs in the Tivoli Enterprise Monitoring
Server start task (CANSDSST default)
About this task
Error message "KDSMA013 and the task ends in "ABEND=S000 U0200
REASON=00000000 KDSMA003 Tivoli Enterprise Monitoring Server data collection
server ended successfully". Ensure the following:
1. The KDS_VTAMID= parameter exists in the &rhilev.&rte.RKANPAR(KDSENV)
member. If it does not exist, then ensure that the Tivoli Enterprise Monitoring
Server is configured correctly. Refer to the "Configuring Tivoli Enterprise
Monitoring Server on z/OS manual for more information about configuring a
z/OS Tivoli Enterprise Monitoring Server.
2. If the KDS_VTAMID= VTAM APPLID exists, ensure that the Tivoli Enterprise
Monitoring Server VTAM major node is activated correctly.
For more information, review the Complete the configuration option on the
Configure the Tivoli Enterprise Monitoring Server main menu.
Chapter 9. Monitoring server troubleshooting
169