Removing The Feeder Drive Assembly - Tektronix 1235N - Phaser Color Laser Printer Service Manual

12. Remove the two screws securing the feeder drive assembly to the metal
frame.
13. Turn the inner frame up side down. To the left and right of the nudger
roll, there is a 1/2 in. (12mm) cutout in the edge of the feeder drive
assembly. At the cutouts, insert a small screwdriver between the metal
frame and the drive assembly and release the two locking tabs. Remove
the feeder drive assembly

Removing the feeder drive assembly

Reverse these steps to install the feeder drive assembly.
178 Phaser 1235 Network Color Printer