Optional Paper Feeder Components; Idler Roller Assembly; Removing The Feeder Control Board Cover - Tektronix 1235N - Phaser Color Laser Printer Service Manual

Optional paper feeder components

Idler roller assembly

Warning
Switch off the power and disconnect the power cord.
1. Remove the printer from the optional paper feeder.
2.
Remove the four screws securing the feeder control board cover plate.
Remove the plate.

Removing the feeder control board cover

3. Carefully disconnect harness SNS0 from the feeder control board
(connector SNS0 is a six pin connector with only two wires - it may be
necessary to remove the feeder control board to disconnect the harness).
4.
Remove the two screws securing the idler roller assembly to the feeder
frame.
164 Phaser 1235 Network Color Printer