Xerographic Components; Shutter Plate; Removing The Shutter Plate - Tektronix 1235N - Phaser Color Laser Printer Service Manual

Xerographic components

Shutter plate

Warning
Switch off the power and disconnect the power cord.
1. Open the top cover.
2.
Remove the drum/toner cartridge basket. Place them in a lightproof
bag and store in a safe place.
3.
Remove the transfer belt unit as explained on page 132.
4. Through the opening in the shutter plate, carefully remove the Shutter
Spring.
5. Open the shutter plate to the full open position.
6.
Carefully lift the tabs on the front edge of the shutter plate over the
stopper and continue to move it toward the front.
7.
Remove the shutter plate.

Removing the shutter plate

Reverse these steps to install the shutter plate; ensure all guide pins on the shutter
plate are properly aligned when reinstalling. Move the shutter plate to the full
closed position to insert the shutter spring.
156 Phaser 1235 Network Color Printer