Top Cover Inner Frame; Removing The Top Shield Plate - Tektronix 1235N - Phaser Color Laser Printer Service Manual

Top cover inner frame

Warning
Switch off the power and disconnect the power cord.
1.
Open the top cover. Remove the drum/toner cartridge basket. Cover
the basket in a lightproof black bag and store in a safe place.
2.
Open the front cover.
3. Remove the left-side cover as detailed on page 88.
4.
Remove the right-side cover as detailed on page 89.
5. Remove the right shield plate as shown on page 93.
6.
Disconnect the nine LED connectors from the print engine controller
board.
7.
Remove the four screws securing the top shield plate to the electrical
chassis.
8.
Remove the shield plate.

Removing the top shield plate

100 Phaser 1235 Network Color Printer