Fuser Latching Handle (Left) - Tektronix 1235N - Phaser Color Laser Printer Service Manual

Fuser latching handle (left)

Warning Switch off the power and disconnect the power cord.
1.
Open the top cover.
2. Open the front cover. Remove the drum/toner cartridge basket. Cover
the basket in a lightproof black bag and store in a safe place.
3. Remove the left-side cover as described in the topic "Left-side cover"
on page 88. Remove the left-side metal shield.
4. Remove the fuser assembly as detailed on page 139.
5.
Release the fuser latching handle spring.
6.
Remove the screws securing the fuser latching handle to the printer
frame.
7.
Remove the left fuser latching handle.

Fuser latching handle (left)

Reverse these steps to install the fuser latching handle (left).
140 Phaser 1235 Network Color Printer