Upper Connector; Removing The Feeder Control Board Cover Plate - Tektronix 1235N - Phaser Color Laser Printer Service Manual

Upper connector

Warning Switch off the power and disconnect the power cord.
1. Remove the printer from the optional paper feeder.
Note If removing the upper connector from feeder 3, remove feeder 2
from feeder 3.
2.
Remove the paper tray from the feeder.
3. Remove the four screws securing the feeder control board cover plate.
Remove the plate.

Removing the feeder control board cover plate

4.
Disconnect harness MAIN1 from the feeder control board.
5. Remove the two screws securing the upper connector to the feeder
frame.
Service Guide 183