Paper Transport Components; Tray 1 Entrance Sensor Actuator; Removing The Tray 1 Entrance Sensor Actuator - Tektronix 1235N - Phaser Color Laser Printer Service Manual

Paper transport components

Tray 1 entrance sensor actuator

Warning
Switch off the power and disconnect the power cord.
1.
Remove the printer unit chassis as detailed in the topic on page 97.
2.
From the bottom of the printer unit chassis, carefully squeeze the two
locking tabs and remove the sensor.

Removing the tray 1 entrance sensor actuator

For reassembly, reinstall the entrance sensor actuator. Ensure the spring arm is on
the plastic post. Reverse these steps to install the tray 1 entrance sensor actuator.
130 Phaser 1235 Network Color Printer