Duplex Unit; Removing The Duplex Unit - Tektronix 1235N - Phaser Color Laser Printer Service Manual

Duplex unit

Warning
Switch off the power and disconnect the power cord.
1. Remove tray 1.
2.
Open the front cover and the front cover inner baffle.
3. Pull the duplex unit out until it stops.
4.
Release the latches on the left and right rails. Accessing the rails may be
easiest at the rear of the printer by reaching through the cavity left by
the removed paper tray.
5. Remove the duplex unit.

Removing the duplex unit

Alternately, to remove the duplex unit:
1.
Pull the duplex unit out until it stops.
2. While holding the right rail. pull out the left rail (with a moderate
amount of force), to free it.
3.
Free the right rail by moving the unit to the left and out.
Service Guide 163