Left Paper Tray Guide Assembly; Removing The Lower Plate Assembly - Tektronix 1235N - Phaser Color Laser Printer Service Manual

Left paper tray guide assembly

Note
Switch off the power and disconnect the power cord.
1. Remove the paper tray 1 from the printer.
2.
Remove the duplexer unit if installed.
3. Remove the electrical chassis as described on "Electrical chassis (card
cage)" on page 94
4. Remove the printer unit chassis as shown on page 97.
5.
Remove the four screws securing the lower plate to the paper tray
guide assemblies
6.
Disconnect CN1 from the low voltage power supply.
7.
Lift the lower plate and power supplies from the tray guides.

Removing the lower plate assembly

104 Phaser 1235 Network Color Printer