Tray 2/3 Feed Roller And Nudger Roller; Removing The Tray 2/3 Feed Roller And Nudger Roller - Tektronix 1235N - Phaser Color Laser Printer Service Manual

Tray 2/3 feed roller and nudger roller

Warning Switch off the power and disconnect the power cord.
1. Remove paper tray 2/3.
2.
Release the locking tab on the left end of the feed roller.
3.
Slide the feed roller to the left and remove.
4. Release the locking tab on the left end of the nudger roller.
5.
Slide the nudger roller to the left and remove.

Removing the tray 2/3 feed roller and nudger roller

Reverse these steps to install the tray 2/3 feed roller and nudger roller.
Service Guide 185