Recommended Tools; Periodically Replaced Parts - Tektronix 1235N - Phaser Color Laser Printer Service Manual

Recommended tools

Toner vacuum cleaner
Suction bulb (air blower)
Cleaning water
Lint-free wipes
Cotton swabs
Imaging unit cover
Isopropyl alcohol (greater than 90% pure)

Periodically replaced parts

Periodically replaced parts

Part name
Standard Toner
Cartridge
Hi-Capacity
Toner Cartridge
Drum Units
Fuser Unit
Transfer Belt
Unit
The following usage patterns may significatly reduce the lives of toner cartridges,
imaging drums and transfer belts: Printing less than 5 pages per job, opening and
closing the top cover, turning the printer off and on, printing on transparencies or
specialty papers and automatic two-sided printing.
82 Phaser 1235 Network Color Printer
Display or
Warning
Condition
When the message
is displayed
When the message
is displayed
When the message
is displayed
When the message
is displayed
When the message
is displayed
Recommended
condition for
replacement
When 5,000 pages are
printed out (5% print
density).
When 10,000 pages
are printed out (5%
print density).
When 22,000 pages
are printed out. (For
5 pages-per-job,
Letter-size paper)
When 60,000 pages
are printed out.
When 66,000 pages
are printed out. (For
5 pages-per-job,
Letter-size paper)
Adjustment after
replacement
No adjustment required
after replacing toner
cartridge
No adjustment required
after replacing toner
cartridge
The printer's imaging drum
unit counters are
automatically reset due to a
fuse being blown in the unit
a few seconds after a unit
is installed
The printer's fuser unit
counter is automatically
reset due to a fuse being
blown in the unit a few
seconds after it is installed
The printer's transfer belt
unit counter is
automatically reset due to a
fuse being blown in the unit
a few seconds after it is
installed