Exit Sensor Assembly - Tektronix 1235N - Phaser Color Laser Printer Service Manual

Exit sensor assembly

Warning
Switch off the power and disconnect the power cord.
1. Open the top cover. Remove the drum/toner cartridge basket. Cover
the basket in a lightproof black bag and store in a safe place.
2. Open the front cover.
3.
Remove the left-side cover as detailed in the topic "Left-side cover" on
page 88.
4.
Remove the right-side cover as described on page 89.
5. Remove the right shield plate as shown on page 93.
6. Remove the card cage as detailed in the topic "Electrical chassis (card
cage)" on page 94.
7. Remove the multi-sheet bypass feeder as shown on page 127.
8.
Remove the fuser exit roller as detailed on page 142.
9. Disconnect the in-line connector to the exit sensor assembly (PARTTEMP).
10.
Lift the duplex exit gate.
11.
Remove the screw securing the exit sensor assembly.
144 Phaser 1235 Network Color Printer