Fuser Latching Handle (Right); Removing The Fuser Latching Handle (Right) - Tektronix 1235N - Phaser Color Laser Printer Service Manual

Fuser latching handle (right)

Warning Switch off the power and disconnect the power cord.
1. Remove the electrical chassis as detailed in "Electrical chassis (card
cage)" on page 94.
2.
Remove the printer unit chassis as detailed on page 97.
3. Release the fuser latching handle spring.
4.
Remove the E-ring securing the fuser latching handle.
5. Remove the fuser latching handle (right).

Removing the fuser latching handle (right)

Reverse these steps to install the fuser latching handle (right).
Service Guide 141