Main Feeder Assembly - Tektronix 1235N - Phaser Color Laser Printer Service Manual

Main feeder assembly

Note Switch off the power and disconnect the power cord.
1. Remove the electrical chassis as detailed in "Electrical chassis (card
cage)" on page 94.
2. Remove the printer chassis as described in the topic "Printer unit
chassis (and low-voltage power supply fan)" on page 97.
3.
Remove the four screws securing the lower plate to the paper tray guide
assemblies.
4.
Disconnect CN1 from the low voltage power supply.
5. Lift the lower plate and power supplies from the tray guides.
6.
Remove the four screws securing the main feeder assembly to the tray
guides.
7. Disconnect harnesses from the optional feeder connector.
8.
Pull harness and connectors through the printer frame.
Service Guide 123