Table of Contents
Advertisement
Frames components
Right shield plate
Warning
Switch off the power and disconnect the power cord.
1.
Open the front cover.
2.
Open the top cover. Remove the drum/toner cartridge basket. Cover
the basket in a lightproof black bag to protect the drum units from light
and store in a safe place.
3.
Remove the right-side cover as explained in "Right-side cover" on
page 89.
4.
Remove the screws securing the right shield plate.
5.
Remove the right shield plate.
Removing the right shield plate
Reverse these steps to install the right shield plate.
Service Guide
93
Advertisement
Table of Contents
Troubleshooting
