Drive assembly components
Main motor assembly
Note
Switch off the power and disconnect the power cord.
1.
Remove the electrical chassis as detailed in "Electrical chassis (card
cage)" on page 94.
2.
Remove the printer unit chassis as detailed on page 97.
3.
Free the harnesses from the channel along the right side of the main
motor assembly.
4.
Disconnect the ribbon cable from the high voltage power supply.
5.
Remove the four screws securing the main motor assembly to the
frame.
6.
Lift the front of the main motor assembly about 2 cm (3/4 in.)
7.
Carefully thread the high-voltage power supply fan harness through
the harness guide and main motor assembly before lifting.
Service Guide
151