Feeder Motor; Removing The Feeder Control Board Cover - Tektronix 1235N - Phaser Color Laser Printer Service Manual

Feeder motor

Warning Switch off the power and disconnect the power cord.
1. Remove the printer from the optional paper feeder.
2.
Remove the paper tray from the feeder.
3.
Remove the four screws securing the feeder control board cover plate.
Remove the plate.

Removing the feeder control board cover

4.
Remove the idler roller assembly as explained on page 164.
5.
Remove the inner frame as detailed on page 166
6. Remove the feeder clutch as shown on page 169.
7.
Disconnect the MOTOR harness from the feeder control board.
8. Remove the screw securing the feed motor bracket to the inner frame.
9.
Remove the two screws securing the feed motor to the feed motor
bracket.
Service Guide 171