Color Registration Solenoid; Removing The Color Registration Solenoid - Tektronix 1235N - Phaser Color Laser Printer Service Manual

Color registration solenoid

Warning
Switch off the power and disconnect the power cord.
1. Remove the printer unit chassis as shown on page 97.
2.
Remove the shutter plate as explained on page 156.
3.
Disconnect the shutter solenoid in-line connector.
4. Release the shutter solenoid harness from all cable clamps.
5.
Remove the screw securing the shutter solenoid to the printer unit
chassis.

Removing the color registration solenoid

Reverse these steps to install the color registration solenoid.
158 Phaser 1235 Network Color Printer