C
Wiring Diagrams
The following illustrations detail the proper means of routing and dressing printer wiring. Incorrect wiring
dressing can result in wires pinched by cabinet panels or damaged by moving parts of the printer.
Only insulated AC voltage heater hoses are
Route the ribbon cable
bundled with low-voltage wiring harness in
behind the sensor wiring harness
the same restraint
Figure C-2 Wire routing on the right side of the printer near I/O board right
C-2
Phaser 340 Color Printer
Tie-wrap wiring harness
Spiral wrap around vacuum tube
Figure C-3 Wire dressing above the x-axis drive
Orient knots of ties downward
Locate wiring harnesses
behind vacuum hose