Installing The Fuser - Tektronix Phaser 540 Plus User Manual

2
Getting Set Up

Installing the fuser

2-10
Phaser 540 Color Printer
1.
Open the front door and the right side door to install the fuser.
(Make sure that the power is always off when installing the
user-replaceable components.)
2.
Remove the fuser from its packaging.
Save all packing material in case you need to return the fuser for
repair or replacement.
Caution
The fuser weighs approximately 4.1 kg (9 lbs.); take care when
handling it.
9008-30