Defining And Configuring Lwapp Ap Groups For Cisco Devices; Viewing And Creating Cisco Ap Groups - Dell PowerConnect W-Airwave User Manual

Figure 52 Groups > Cisco WLC Config > WLANs > Add New SSID/VLAN > Advanced Tab Illustration

Defining and Configuring LWAPP AP Groups for Cisco Devices

The Groups > Cisco WLC Config > WLANs > Advanced > AP Groups page allows you to add/edit/delete AP
Groups on the Cisco WLC. LWAPP AP Groups are used to limit the WLANs available on each AP. Cisco thin
APs are assigned to LWAPP AP Groups.

Viewing and Creating Cisco AP Groups

1. Go to the Groups > Cisco WLC Config page, and select WLANs > Advanced > AP Groups in the
navigation pane at left. This page displays the configured LWAPP APs. Figure 53 illustrates this page.
Figure 53 Groups > Cisco WLC Config > WLANS > Advanced > AP Groups Page Illustration
92 | Configuring and Using Device Groups in AMP Dell PowerConnect W-AirWave | Version 7.3