Changing Multiple Group Configurations - Dell PowerConnect W-Airwave User Manual

W-airwave 7.3 user guide
Hide thumbs Also See for PowerConnect W-Airwave:
Table of Contents

Advertisement

4. Ensure that the Group is not a Global Group which has Subscriber Groups, and is not a Group that was
pushed from a Master Console. AMP will not delete a Group in which either of those is true.
5. Select the checkbox and select Delete.

Changing Multiple Group Configurations

Perform the following steps to make any changes to an existing group's configuration:
1. Browse to the Groups > List configuration page.
2. Select the Manage link (the pencil icon) for the group you wish to edit. The Groups > Basic configuration
page appears.
3. Select the fields to be edited on the Basic configuration page or go to Radio, Security, VLANs, or MAC ACL
configuration page and edit the fields. Use the Save button to store the changes prior to applying them.
4. When all changes for the group are complete select the Save and Apply button to make the changes
permanent.
Figure 63 Groups > Basic Configuration Change Confirmation Page Illustration
5. AMP displays a Configuration Change screen confirming the changes that will be applied to the group's
settings.
6. There are several action possibilities from within this confirmation configuration page.
Apply Changes Now — Applies the changes immediately to access points within the group. If you wish to
edit multiple groups, you must use the Preview button.
NOTE: You cannot apply Dell PowerConnect W Config changes to other groups. If the only changes on the configuration page are
to Dell PowerConnect W-Series devices, the list of groups and the preview button will not appear.
Schedule — Schedules the changes to be applied to this group in the future. Enter the desired change date
in the Start Date/Time field. AMP takes the time zone into account for the group if a time zone other
than AMP System Time has been configured on the Groups > Basic configuration page.
Dell PowerConnect W-AirWave | User Guide
Figure 63
illustrates the confirmation message that appears.
Configuring and Using Device Groups in AMP | 99

Advertisement

Table of Contents
loading

This manual is also suitable for:

Powerconnect w-airwave 7.3

Table of Contents