General Aruba Ap Groups Procedures And Guidelines; Guidelines And Pages For Aruba Ap Groups In Aruba Configuration; Selecting Aruba Controller Groups; Configuring Aruba Ap Groups - Dell PowerConnect W-Airwave Configuration Manual

General Aruba AP Groups Procedures and Guidelines

Guidelines and Pages for Aruba AP Groups in Aruba Configuration

The fields and default settings for Aruba AP Groups are described in
The following guidelines govern the configuration and use of Aruba AP Groups across AWMS:
Aruba AP Groups function with standard AWMS groups that contain them. Add Aruba AP Groups to
standard AWMS groups. Additional procedures in this document explain their interoperability.
APs can belong to a controller's AWMS group or to an AWMS group by themselves.
All configurations of Aruba AP Groups must be pushed to Aruba controllers to become active on the
network.
Additional dynamics between master, standby master, and local controllers still apply. In this case, refer
to "Using Master, Standby Master, and Local Controllers in Aruba Configuration" on
The following pages in AWMS govern the configuration and use of Aruba AP Groups or standard device
groups across AWMS:
Device Setup > Aruba Configuration
The
custom-configured Aruba AP Groups, WLANs, and AP Overrides.
You define or modify Aruba AP Groups on the
Groups
You select Aruba AP Groups to associate with AMP (AWMS) Groups with the
You modify devices in Aruba AP Groups with the
This is the page at which you assign devices to a given group and Aruba AP Group.

Selecting Aruba Controller Groups

To select Aruba AP Groups, navigate to the
defining Aruba AP Groups, to viewing the AMP groups with which an Aruba AP Group is associated,
changing or deleting Aruba AP Groups, and assigning AP devices to an Aruba AP Group.

Configuring Aruba AP Groups

Perform the following steps to display, add, edit, or delete Aruba AP Groups in
1. Browse to the
navigation pane on the left. The
Groups, as illustrated in
34 | Using Aruba Configuration in Daily Operations
from the navigation pane.
Device Setup > Aruba Configuration
Groups Summary
Figure 21
navigation pane displays standard AOS components and your
Device Setup > Aruba Configuration
APs/Devices > List
Device Setup > Aruba AP Groups
page, and click the
page appears and displays all current Aruba AP
and described in Table 3
AirWave Wireless Management Suite | Configuration Guide
"Aruba AP Groups" on
page. Click
Groups > Aruba Config
Modify These Devices
page, clicking
page. This page is central to
Aruba Configuration
AP Groups
heading in the
of the Appendix.
page 53.
page 40.
Aruba AP
page.
.
.