Adding A Mobile Device Management Server For Mobicontrol; Accessing Mobicontrol From The Users > User Detail Page - Dell PowerConnect W-Airwave User Manual

Adding a Mobile Device Management Server for MobiControl

1. To add an MDM server to AMP, navigate to AMP Setup > MDM Server and select Add. Complete the fields
on this page.
Table 118 AMP Setup > MDM Server > Add Fields and Descriptions
Field
Hostname/IP
Address
Protocol
URL Context
Enabled
Username/
Password
Polling Period
2. When finished, select Add.
The list page for the MDM server also displays:
Last Contacted – The last time AirWave was able to contact the MDM server.

Errors – Issues, if any, encountered during the last contact.

During each polling period, AMP will obtain a list of all device IDs and their WLAN MAC addresses. The
information about device OS, device OS Detail, Manufacturer, Model, Name are retrieved from MobiControl
and populated to the Users > User Detail page for supported mobile devices. A View device in SOTI
MobiControl link provides direct access to the MobiControl Web Console for additional details about the
device. MobiControl information overrides data obtained from ArubaOS 6.0 controllers.
Accessing MobiControl from the Users > User Detail Page
In order to access the MobiControl web console for a SOTI-managed mobile device from within AirWave, follow
these steps:
1. Navigate to a page that lists clients. This can include:


2. Select the MAC address in the Users list table. The Users > User Detail page displays.
3. Under the Classification field, select the View device in SOTI MobiControl link. A new window will display
the MobiControl Web Console for this device.
Dell PowerConnect W-AirWave | User Guide
Table 118 describes the settings and default values:
Description
The address or DNS hostname configured for your MobiControl Web Console.
Whether HTTP or HTTPS is to be used when polling the MDM server. The port on which to connect to the
MDM server is inferred from the protocol: with HTTP, AirWave will connect to port 80 of the SOTI server; with
HTTPS, AirWave will connect to port 443.
The URL context appended to the server URL to build the URL when connecting with the SOTI server. For
MobiControl v8.0x the default URL Context is "MobiControlWeb". For MobiControl v8.5x the default URL
Context is "MobiControl".
Whether this server can be polled by AirWave. Make sure it is set to Yes.
The login credentials for accessing the web console of the MobiControl system.
The frequency in which AirWave polls the MDM server. The default is 5 minutes.
Users > Connected or Users > All
Search results that display user MAC address
Performing Daily Administration in AirWave | 205