Dell PowerConnect W-Airwave User Manual page 194

Table 114 Users > Connected Table Columns and Links (Alphabetical) (Continued)
Field
Cipher
Connection
Mode
Device Type
Duration
EAP Supplicant
Forward Mode
Group
Guest User
Interface
LAN Hostname
LAN IP Address
Location
MAC Address
Manufacturer
Model
Name
Network Chipset
Network Driver
Notes
OS
OS Detail
Phone Number
Role
Serial Number
Service End
Service Start
Sig. Qual.
SSID
Tunneled
Controller
Username
194 | Performing Daily Administration in AirWave
Description
Displays WEP with keys. This data is also displayed in the User Session report in the Session Data By User
section.
The Radio mode used by the user to associate to the AP for 802.11n clients.
The type of device determined by AMP Setup > Device Type Setup rules.
The length of time the MAC address has been associated.
The party being authenticated in the Extensible Authentication Protocol.
Forwarding mode for the port: Bridge, Tunnel, or Split Tunnel.
The group containing the AP that the user is associated with.
Specifies whether the user is a guest.
The interface on the device to which the user is connected.
The LAN hostname of the user MAC.
The IP assigned to the user MAC. AMP gathers it from the association table of APs.
If a value appears here, the location of this user's client has been mapped on VisualRF. Select the location to
open a new VisualRF Floor Plan Location window.
The radio MAC address of the user associated to APs as a link to the Users > Detail page for this user.
The manufacturer of the user's device.
The model of the user's device.
The product of the user's device.
The chipset indicates the functions the device was designed to perform.
Driver name or other information.
Free notes about the user.
The device's operating system type.
Additional information on the operating system such as version numbers.
Contact number for the user.
Specifies the role that an Dell PowerConnect W controller assigned to the connected user, such as
"employee".
Serial number of the device.
Ending timestamp of the device usage.
Beginning timestamp of the device usage.
The average signal quality the user experienced.
The SSID with which the user is associated.
If a user is connected to an Aruba Mobility Switch, indicates which controller the user is authenticated to.
Displays the name of the user associated to the AP. AMP gathers this data from device traps, SNMP polling,
or RADIUS accounting. Usernames appear in italics when a username for that MAC address has been stored
in the database from a previous association, but AMP is not getting a username for the current association.
This may indicate that the user has not yet been authenticated for this session or AMP may not be getting a
username from an external source.
Dell PowerConnect W-AirWave | Version 7.3