For square or rectangular floor plans ensure access points are deployed on the exterior walls of each floor with
access points in the middle as well. Refer to
Figure 215 Rectangular Floor Plan AP Deployment
Using QuickView to Assess RF Environments
QuickView has four distinct views or entry points: client view, access point view, floor plan view, and network,
campus, and building view.
This section contains the following corresponding topics:
"Viewing a Wireless User's RF Environment" on page 276
"Viewing an AP's Wireless RF Environment" on page 278
"Viewing a Floor Plan's RF Environment" on page 279
"Viewing a Network, Campus, Building's RF Environment" on page 280
Viewing a Wireless User's RF Environment
1. Navigate to Users > List in AMP.
2. Click the link under the Location column for the user of interest, as shown in
window of that location opens and indicates the client with a Username label, as shown in
Figure 216 Link to user's thumbnail (the Location column)
Figure 217 QuickView of the selected device
276 | Using VisualRF
Figure 215
for an example.
Dell PowerConnect W-AirWave | Version 7.3
Figure
216. A QuickView
Figure
217: