Dell PowerConnect W-Airwave User Manual page 150

Table 88 Groups > Templates > Add Template Fields and Default Values
Setting
Use Global Template
Fetch
Name
AP Type
Reboot APs After
Configuration Changes
Restrict to this version
Template firmware
version
Community String
Telnet/SSH Username
Telnet/SSH Password
"enable" Password
SNMPv3 Username
Auth Password
Privacy Password
SNMPv3 Auth Protocol
SNMPv3 Privacy
Protocol
150 | Creating and Using Templates
Default Description
No Uses a global template that has been previously configured on the Groups >
Templates configuration page. Available templates will appear in the drop-down
menu. If Yes is selected you can also configure global template variables. For
Symbol devices you can select the groups of thin APs to which the template
should be applied.
None Selects an AP from which to fetch a configuration. The configuration will be
turned into a template with basic AP specific settings like channel and power
turned into variables. The variables are filled with the data on the APs/Devices >
Manage page for each AP.
None Defines the template display name.
Cisco IOS (Any Determines that the template applies to APs or devices of the specified type. If
Model) Cisco IOS (Any Model) is selected, the template applies to all IOS APs that do not
have a version specific template specified.
No Determines reboot when AMP applies the template, copied from the new
configuration file to the startup configuration file on the AP. If No is selected, AMP
uses the AP to merge the startup and running configurations. If Yes is selected,
the configuration is copied to the startup configuration file and the AP is rebooted.
This field is only visible for some devices.
No Restricts the template to APs of the specified firmware version. If Yes is selected,
the template only applies to APs on the version of firmware specified in the
Template Firmware Version field.
None Designates that the template only applies to APs running the version of firmware
specified.
None If the template is updating the community strings on the AP, enter the new
community string AMP should use here. AMP updates the credentials it is using to
communicate to the device after the device has been managed.
None If the template is updating the Telnet/SSH Username on the AP, enter the new
username AMP should use here. AMP updates the credentials it is using to
communicate to the device after the device has been managed.
None If the template is updating the Telnet/SSH password on the AP, enter the new
Telnet/SSH password AMP should use here. AMP updates the credentials it is
using to communicate to the device after the device has been managed.
None If the template is updating the enable password on the AP, enter the new enable
password AMP should use here. AMP updates the credentials it is using to
communicate to the device after the device has been managed.
None If the template is updating the SNMP v3 Username password on the AP, enter the
new SNMP Username password here. AMP updates the credentials it is using to
communicate to the device after the device has been managed.
None If the template is updating the SNMP v3 Auth password on the AP, enter the new
SNMP Username password here. AMP updates the credentials it is using to
communicate to the device after the device has been managed.
None If the template is updating the SNMP v3 Privacy password on the AP, enter the
new SNMP Username password here. AMP updates the credentials it is using to
communicate to the device after the device has been managed.
MD5 Specifies the SNMPv3 Auth protocol, either MD5 or SHA-1.
DES Specifies the SNMPv3 Privacy protocol, either DES or AES.
Dell PowerConnect W-AirWave | Version 7.3