Dell PowerConnect W-Airwave User Manual page 64

The necessary files for either type of NMS interoperability are downloaded from the AMP Setup > NMS page

as follows. For additional information, contact support.
Perform these steps to configure NMS support in AMP:
1. Go to AMP Setup > NMS, illustrated in
Figure 34 AMP Setup > NMS Page Illustration
2. Select Add to integrate a new NMS server, or select the pencil icon to edit an existing server. Provide the
information described in
Table 36 AMP Setup > NMS Integration Add/Edit Fields and Default Values
Setting
Hostname
Port
Community String
SNMP Version
Enabled
Send Configuration Traps Yes
3. The NMS Integration Add/Edit page includes the Netcool/OMNIbus Integration link to information and
instructions. The IBM Tivoli Netcool/OMNIbus operations management software enables automated event
correlation and additional features resulting in optimized network uptime.
4. The NMS Integration Add/Edit page includes the HP ProCurve Manager Integration link. Select this link
for additional information, zip file download, and brief instructions for installation with AMP. Select Add to
finish creating the NMS server, or Save to configure an existing NMS server.
What Next?
Go to additional tabs in the AMP Setup section to continue additional setup configurations.

Complete the required configurations in this chapter before proceeding.

64 | Configuring AMP
Figure
Table 36:
Default Description
None Cites the DNS name or the IP address of the NMS.
162 Sets the port AMP uses to communicate with the NMS.
NOTE: AMP generally communicates via SNMP traps on port 162.
None Sets the community string used to communicate with the NMS.
v2C Sets the SNMP version of the traps sent to the Host.
Yes Enables or disables trap logging to the specified NMS.
Enables NMS servers to transmit SNMP configuration traps.
34.
Dell PowerConnect W-AirWave | Version 7.3