Setting Up Device Types - Dell PowerConnect W-Airwave User Manual

Perform these steps to add or edit Web Auth bundles in AMP.
1. Go to the Device Setup > Upload Firmware & Files page. This page displays any existing Web Auth bundles
that are currently configured in AMP, and allows you to add or delete Web Auth bundles.
2. Scroll to the bottom of the page. Select Add New Web Auth Bundle to create a new Web Auth bundle (see
Figure
by selecting that bundle with the checkbox, and selecting Delete.
Figure 29 Add Web Auth Bundle Page Illustration
3. Enter a descriptive label in the description field. This is the label used to identify and track Web Auth bundles
on the page.
4. Enter the path and filename of the Web Auth configuration file in the Web Auth Bundle field or select
Choose File to locate the file.
5. Select Add to complete the Web Auth bundle creation, or Save if replacing a previous Web Auth
configuration file, or Cancel to abort the Web Auth integration.
For additional information and a case study that illustrates the use of Web Auth bundles with Cisco WLC
controllers, refer to the following document on Cisco.com:
Wireless LAN controller Web Authentication Configuration Example, Document ID: 69340

http://www.cisco.com/en/US/tech/tk722/tk809/technologies_configuration_example09186a008067489f.shtml

Setting Up Device Types

On AMP Setup > Device Type Setup, you can define how the Device Type displayed for users on your network
is calculated from available data. The first matching property is used. These rules cannot be edited or deleted, but
only reordered or enabled.
You can change the priority order of rules by dragging and dropping rows, as shown in
Check or uncheck the checkbox under the Enabled column to turn device setup rules on or off.
Refer to
column that appears in Users list tables.
Figure 30 AMP Setup > Device Type Setup Page Illustration
Dell PowerConnect W-AirWave | User Guide
29), or select the pencil icon next to an existing bundle to edit. You may also delete Web Auth bundles
"Monitoring and Supporting WLAN Users" on page 191
Figure
for more information on the Device Type
30.
Configuring AMP | 57