Figure 180 Reports > Generated > RADIUS Authentication Issues Detail Page Illustration
Using the RF Health Report
The RF Health Report tracks the top AP radio issues by noise, MAC/Phy errors, channel changes, transmit power
changes, mode changes, and interfering devices (the last two apply only if there are ARM events). This report
assists in pinpointing the most problematic devices on your network, and lists the top 10 devices by problem type.
Problematic APs are displayed in two separate lists Problem Radios lists, grouped by radio frequency. A device will
make it into the list if it violates two or more thresholds. (For more on the thresholds that indicate problems,
refer to
"Evaluating Radio Statistics for an AP" on
page 121.)
Other lists grouped by radio frequency include Most Noise, Most/Least Utilized by Channel Usage, Most MAC/
Phy Errors, Most Channel Changes, Most Transmit Power Changes.
If an RF Health Report has not been generated before, you can create it by following the instructions on the
Defining Reports
section of this chapter.
Figure 181
illustrates a sample RF Health Report.
Dell PowerConnect W-AirWave | User Guide
Creating, Running, and Emailing Reports | 245