Deploying Wms Offload; Overview Of Wms Offload In Amp - Dell PowerConnect W-Airwave User Manual

Figure 35 AMP Setup > PCI Compliance Page Illustration
2. To enable, disable, or edit any category of PCI Compliance monitoring in AMP, select the pencil icon next to
the category. The Default Credential Compliance page displays for the respective PCI standard.
3. Create changes as required. Specific credentials can be cited in the Forbidden Credentials section of any Edit
page to enforce PCI requirements in AMP.
Figure 36 Default Credential Compliance for PCI Requirements
4. Select Save.
5. To view and monitor PCI auditing on the network, use generated or daily reports. See
Running, and Emailing Reports"
online. Perform these steps:
a. Go to the APs/Devices > List page, select a specific device, and the Monitor page for that device displays.
The Monitor page displays a PCI Compliance subtab in the menu bar.
b. Select PCI Compliance to view complete PCI compliance auditing for that specific device.
What Next?
Go to other tabs in the AMP Setup section to continue additional setup configurations.

Complete the required configurations in this chapter before proceeding.


Deploying WMS Offload

Overview of WMS Offload in AMP

This section describes the Dell PowerConnect W Wireless LAN Management Server (WMS) offload
infrastructure. WMS Offload is supported with the following two requirements:
Dell PowerConnect W-AirWave | User Guide
Figure 36 shows one example.
. In addition, you can view the real-time PCI auditing of any given device
Chapter 9, "Creating,
Configuring AMP | 67