Dell PowerConnect W-Airwave User Manual page 101

Figure 64 Modify Multiple Devices Section Illustration
3. Select one or more devices that are to share the configurations. Select the checkbox for each device to modify.
4. In the Modify Multiple Devices section, select any button or use any drop-down menu for the supported
changes. Any action you take applies to all selected devices. Each action you take will direct you to a new
configuration page, or prompt you with a confirmation page to confirm your changes.
5. You are taken to a confirmation configuration page that allows you to schedule the change for a time in the
future. Enter a start date and time in the scheduling field and select when the change should occur from the
drop-down menu (one time is the default, but you may select recurring options for many of the actions).
Scheduled jobs can be viewed and edited in the System > Configuration Change Jobs tab.
6. Using the neighbor lists, AMP is able to optimize channel selection for APs. Select the APs to optimize and
AMP minimizes the channel interference while giving channel priority to the most heavily used APs.
describes these actions and controls.
Table 68 Modify Multiple Devices Section Fields and Default Values
Action
AMP Group/Folder
Dell PowerConnect W AP
Group
Desired Radio Status
Dell PowerConnect W-AirWave | User Guide
Description
Move the selected devices to a new group or folder. If the AP is in managed mode when it is
moved to a new group, it will be reconfigured.
Moves the selected APs to a new group or folder. If the AP is in managed mode when it is moved
to a new group it will be reconfigured.
Enables or disables the radios on the selected device. Does not apply Cisco IOS APs.
Configuring and Using Device Groups in AMP | 101
Table 68