Airgroup Device Registration; Registering Groups Of Devices Or Services - Dell Powerconnect W-ClearPass Hardware Appliances Deployment Manual

NOTE: If you delete the base account, all of its pairings will also be deleted. If RFC-3576 has been configured, all pairs will be logged
out.

AirGroup Device Registration

AirGroup allows users to register their personal mobile devices on the local network and define a group of friends or
associates who are allowed to share them. If AirGroup Services is enabled, AirGroup administrators can provision
their organization's shared devices and manage access, and AirGroup operators can register and provision a limited
number of their own personal devices for sharing. For complete AirGroup deployment information, refer to the
AirGroup Deployment Guide and the ClearPass Policy Manager documentation.

Registering Groups of Devices or Services

This functionality is only available to AirGroup administrators.
To register and manage an organization's shared devices and configure device access:
1. Log in as the AirGroup administrator and go to Guest > Create Device. The Register Shared Device form
opens.
2. In the Device Name field, enter the name used to identify the device.
3. In the MAC Address field, enter the device's MAC address.
4. In the Shared Locations field, enter the locations where the device can be shared. To allow the device to be
shared with all locations, leave this field blank.
Each location is entered as a tag=value pair describing the MAC address of the access point (AP) closest to the
registered device. Use commas to separate the tag=value pairs in the list. Tag=value pair formats are shown in
the following table.
Table 10:
Tag=Value Pair Formats
AP Type
Name-based AP
Group-based AP
FQLN-based AP
Dell Networking W-ClearPass Guest 6.0 | Deployment Guide
Tag=Value Format
ap-name=<name>
ap-group=<group>
fqln=<fqln>
AirGroup Device Registration | 53