Dell PowerConnect W-Airwave User Manual page 81

Figure 42 Groups > Security Page Illustration
Table 53 Groups > Security Page Fields and Default Values
Setting
VLANs Section
VLAN Tagging and Multiple
SSIDs
Management VLAN ID
General Section
Create Closed Network
Block All Inter-client
Communication
EAP Options Section
WEP Key Rotation Interval
RADIUS Authentication Servers Section
RADIUS Authentication
Server #1 - #4
Dell PowerConnect W-AirWave | User Guide
Default Description
Enabled This field enables support for VLANs and multiple SSIDs on the wireless network. If
this setting is enabled, define additional VLANs and SSIDs on the Groups > SSIDs
page. Refer to "Configuring Group SSIDs and VLANs" on
Untagged This setting sets the ID for the management VLAN when VLANs are enabled in
AMP. This setting is supported only for the following devices:
Proxim AP-600, AP-700, AP-2000, AP-4000

Avaya AP-3, Avaya AP-7, AP-4/5/6, AP-8

ProCurve520WL

No If enabled, the APs in the Group do not broadcast their SSIDs.
NOTE: Creating a closed network will make it more difficult for intruders to detect
your wireless network.
No If enabled, this setting blocks client devices associated with an AP from
communicating with other client devices on the wireless network.
NOTE: This option may also be identified as PSPF (Publicly Secure Packet
Forwarding), which can be useful for enhanced security on public wireless
networks.
300 Sets the frequency at which the Wired Equivalent Privacy (WEP) keys are rotated in
the device group being configured. The supported range is from 0 to 10,000,000
seconds.
Not selected Defines one or more RADIUS Authentication servers to be supported in this device
group. Select up to four RADIUS authentication servers from the four drop-down
menus.
page 82.
Configuring and Using Device Groups in AMP | 81