Quick Links For Users On Dell Devices; Using The Deauthenticate User Feature; Viewing A User's Association History - Dell PowerConnect W-Airwave User Manual

Quick Links for Users on Dell Devices

In Users > User Detail, two drop-down menus were added in AirWave 7.3 next to the Save button in the Device
Info section:
Open controller web UI: A drop-down menu that allows you to jump to the controller's UI in a new window.

Thin APs link to Controller > Access Points when not operating in mesh mode, or Controller > Mesh Nodes
otherwise. Controllers show several more pages in this menu (Security Dashboard, for instance) if the
controller is running AOS version 6.1 or greater.
Run a command: A drop-down menu with a list of CLI commands you can run directly from the APs/Devices

> Monitor page.
Figure 142 Open controller web UI and Run a command Menus in Users > User Detail

Using the Deauthenticate User Feature

Some displays of the User > User Detail page include the Deauthenticate User feature in the Current
Association section. Specifically, those displays are for devices which support this operation, namely Dell and
Cisco WLC with firmware version v4.0.0.0 or later.
Select Deauthenticate User to use this feature, as shown in
Figure 143 Deauthenticate User button in Current Association section of Users > User Detail

Viewing a User's Association History

Past association details of a user are tracked in the Association History table, which is located under the VRF
QuickView illustration (if available) and the Alert Summary in Users > User Detail.
The columns in this table, shown in
this user.
Figure 144 Association History in Users > User Detail
Dell PowerConnect W-AirWave | User Guide
Figure
Figure 144, are the same as the fields in the Current Association section for
143:
Performing Daily Administration in AirWave | 201