Error Message Summaries - Xerox 4400DT - Phaser B/W Laser Printer Service Manual

Index of Errors (cont'd.)
Front Panel Message
Fan Failure; Power Off Now.
Engine Logic Board NVRAM Failure.
Image Processor POST Error Codes

Error Message Summaries

Note: The messages listed in the "Diagnostic Message" column
appear only in Service Diagnostics while printing Engine
Test Prints. The code numbers in these messages also
appear as part of the Help information displayed when you
press i.
Front Panel Diagnostic
Message Message
Jam At Tray [#]; E2-01: Feed Jam
Open Tray [#] E2-02
and Front Cover E2-03
to Clear.
E2-11: Feed Jam
Press i.
E2-12
E2-13
Jam At E2-0E: Feed Jam
Envelope
Feeder;
Remove Feeder
E2-1E: Feed Jam
and Open Front
Cover to Clear.
Press i.
Jam At MPT; E2-0M: Feed Jam
Open Front
Cover To Clear.
Press i.
E2-1M: Feed Jam
2-12
Error Description Troubleshooting
Paper arrives at
Registration Sensor
too early.
Paper does not
arrive at Registration
Sensor position
within the specified
time.
Paper arrives at
Registration Sensor
too early.
Paper does not
arrive at Registration
Sensor position
within the specified
time.
Paper arrives at
Registration Sensor
too early.
Paper does not
arrive at REG
Sensor position
within the specified
time.
Phaser 4400 Laser Printer Service Manual
Code: U5
Code: U6
Procedure
Open Tray [#].
Open Front Cover.
Clear Paper Path.
Go to Jam at Tray [#]. Open
Tray [#] and Front Cover.
on page 2-18.
Remove Envelope Feeder.
Open Front Cover.
Clear Paper Path.
Go to Jam at Envelope
Feeder; Remove Feeder
and Open Front Cover.
page 2-21.
Open Front Cover and
remove paper.
Go to Jam at MPT; Open
Front Cover to Clear.
page 2-22.
Page
2-49
2-50
2-58
on
on