RRP 10.10 Direction Solenoid
See the Parts List on
Warning: Switch off the power and disconnect the Power Cord.
1.
Remove the Stacker
2.
Remove the Lower Cover
3.
Remove the Inner Exit Chute Assembly
page 6-106).
4.
Disconnect P/J228 from the Direction Solenoid.
5.
Remove the two screws that secure the solenoid to the Inner Exit Chute Assembly.
6.
Remove the solenoid.
Direction Solenoid
6-110
page
7-40.
(RRP 10.1 Stacker
(RRP 10.5 Lower Cover
on page 6-101).
on page 6-105).
(RRP 10.6 Inner Exit Chute Assembly
Phaser 4400 Laser Printer Service Manual
on