Rrp 9.10 Rear Interlock Switch Assembly - Xerox 4400DT - Phaser B/W Laser Printer Service Manual

RRP 9.10 Rear Interlock Switch Assembly

See the Parts List on
Caution: These components are susceptible to electrostatic
discharge. Observe all ESD procedures to avoid damage.
Warning: Switch off the power and disconnect the Power Cord.
1. Remove Tray 1.
2. Remove the Left Interface Cover
3. Remove the Left Cover
4. Remove the Front Cover Assembly
page 6-11).
5. Remove the Left Front Cover
6. Remove the Top Cover Assembly
7. Open the Rear Cover Assembly.
8. Remove the Interlock Cover
9. Remove the Left Plate
10.Remove the Exit Chute Assembly
11.Disconnect P/J30 from Engine Logic Board.
12.Release the Harness from all cable clamps.
13.Remove the screw that secures the Rear Interlock Switch Assembly to the printer.
14.Remove the Rear Interlock Switch Assembly.
Rear Interlock Switch Assembly
Phaser 4400 Laser Printer Service Manual
page 7-24.
(RRP 1.1 Left Interface Cover
(RRP 1.2 Left Cover
(RRP 1.7 Left Front Cover
(RRP 1.4 Top Cover Assembly
(RRP 1.10 Interlock Cover
(RRP 1.11 Left Plate
(RRP 6.4 Exit Chute Assembly
on page 6-7).
(RRP 1.6 Front Cover Assembly
on page 6-16).
on page 6-6).
on
on page 6-12).
on page 6-9).
on page 6-15).
on page 6-69).
6-97