RRP 10.2 Exit Tray Extension
See the Parts List on
Warning: Switch off the power and disconnect the Power Cord.
1.
Open the Exit Tray Extension.
2.
Slide the tray to the left.
3.
Carefully deflect the center of the tray until the right hinge pin is free.
4.
Slide the tray to the right and remove it.
Exit Tray Extension
RRP 10.3 Exit Tray
See the Parts List on
Warning: Switch off the power and disconnect the Power Cord.
1.
Remove the Exit Tray Extension
2.
Squeeze the upper end of the Paper Weight and remove.
3.
Slide the tray to the left.
4.
Push the right hinge pin in until it is free of the Stacker.
5.
Push the left hinge pin in until it is free of the Stacker.
6.
Remove the Exit Tray.
6-102
page
7-38.
page
7-38.
(RRP 10.2 Exit Tray Extension
Phaser 4400 Laser Printer Service Manual
on page 6-102).