Rrp 12.6 Connector Chute Assembly - Xerox 4400DT - Phaser B/W Laser Printer Service Manual

RRP 12.6 Connector Chute Assembly

See the Parts List on
Warning: Switch off the power and disconnect the Power Cord.
1. Remove the Duplex Unit
2. Remove the Duplex Cover
3. Remove the Drive Cover
4. Remove the Duplex PWB
disconnect P/J39.
5. Remove the connector harness from all cable clamps and pull connector through
the hole in the frame.
6. Remove the two screws that secure the Connector Chute Assembly.
Connector Chute Assembly
6-146
page 7-34.
(RRP 12.1 Duplex Unit
(RRP 12.3 Duplex Cover
(RRP 12.5 Drive Cover
(RRP 12.4 Duplex PWB
on page 6-141).
on page 6-143).
on page 6-145).
on page 6-144). Only
Phaser 4400 Laser Printer Service Manual