Rrp 10.6 Inner Exit Chute Assembly - Xerox 4400DT - Phaser B/W Laser Printer Service Manual

RRP 10.6 Inner Exit Chute Assembly

See the Parts List on
Warning: Switch off the power and disconnect the Power Cord.
1. Remove the Stacker
2. Remove the Lower Cover
3. Remove the five screws that secure the Inner Exit Chute Assembly.
4. Hold open the Rear Cover.
5. Remove the assembly.
Inner Exit Chute Assembly
6-106
page 7-38.
(RRP 10.1 Stacker
(RRP 10.5 Lower Cover
on page 6-101).
on page 6-105).
Phaser 4400 Laser Printer Service Manual