RRP 10.13 Stacker Full Sensor
See the Parts List on
Warning: Switch off the power and disconnect the Power Cord.
1.
Remove the Stacker
2.
Remove the Lower Cover
3.
Remove the Inner Exit Chute Assembly
page 6-106).
4.
Remove the Stacker PWB
5.
Disconnect P/J225 from the Stacker Full Sensor.
6.
Release the locking tabs that secure the sensor.
7.
Remove the sensor.
Stacker Full Sensor
Phaser 4400 Laser Printer Service Manual
page
7-40.
(RRP 10.1 Stacker
(RRP 10.5 Lower Cover
(RRP 10.7 Stacker PWB
on page 6-101).
on page 6-105).
(RRP 10.6 Inner Exit Chute Assembly
on page 6-107).
on
6-113