Registration (Side-To-Side) - Xerox 4400DT - Phaser B/W Laser Printer Service Manual

Registration (Side-to-Side)

Registration (Side-to-Side)
Actions and Questions
Note: Insure that Edge-to-edge printing is set to
OFF in the PCL Job Defaults Menu before
starting the Test Print. Otherwise, the image
will be shifted left.
Measure the registration on two consecutive Test
Prints. Fold the paper in half (side edge to side edge).
Observe the fold line of the paper with reference to
the cross hairs of the target.
Is the fold within +/- 2.0 mm of the target cross
hairs (each line on the target is 1 mm).
Phaser 4400 Laser Printer Service Manual
Yes
The Test Prints
meet the side to
side registration
specification. Go
to Registration
(Lead
Edge-to-Trail
Edge) on
page 3-48.
No
Go to Registration
on page 3-81.
3-47