RRP 3.10 Feeder Socket
See the Parts List on
Warning: Switch off the power and disconnect the Power Cord.
1.
Remove Tray 1.
2.
Remove the Left Interface Cover
3.
Remove the Left Cover
4.
Remove the Front Cover Assembly
page 6-11).
5.
Remove the Left Front Cover
6.
Remove the Left Plate
7.
Remove the Plate Handle
8.
Open Rear Door.
9.
Remove the Top Cover Assembly
10.Remove the Right Cover
11.Remove the LVPS PWB
12.Remove the Paper Feeder
13.Remove the two screws that secure the Feeder Socket in the printer.
Note:
It may be necessary to use a scribe or small screwdriver to lift
the locking tabs to disconnect P/J671.
14.Lift locking tabs and disconnect P/J671 from the Socket.
Feeder Socket
Phaser 4400 Laser Printer Service Manual
page
7-10.
(RRP 1.1 Left Interface Cover
(RRP 1.2 Left Cover
(RRP 1.7 Left Front Cover
(RRP 1.11 Left Plate
(RRP 1.12 Plate Handle
(RRP 1.4 Top Cover Assembly
(RRP 1.5 Right Cover
(RRP 9.5 LVPS PWB
(RRP 3.1 Paper Feeder
on page 6-7).
(RRP 1.6 Front Cover Assembly
on page 6-16).
on page 6-17).
on page 6-10).
on page 6-91).
on page 6-28).
on page 6-6).
on
on page 6-12).
on page 6-9).
6-39